How to Use Android Fastboot Reset Tool v2.0

How to Use Android Fastboot Reset Tool v2.0

Step1: Download Android Fastboot Reset Tool v2.0 from below given link.

Step2: Download And install Android Fastboot Reset Tool v2.0

Step3: Now open the folder and click on Android Fastboot Reset Tool V12.0.exe.

Step4: Now turn off your phone and open it in fastboot mode by pressing power button + volume down button simultaneously.

Step5: Connect your phone to your computer using the USB cable.

Step6: Now type the number of FRP unlock option according to your phone brand company.

Step7: hit enter button to begin unlocking process.

Step8: After completion, remove your device and turn it On.

By above simple 8 steps, you can easily remove FRP lock/pattern lock on your phone by using Android Fastboot Reset Tool V2.0

I hope this article helped you in unlocking your phone’s FRP and other related problem. For more such useful articles don’t forget to visit again.

Warning – umang class is not responsible for any damage that occurs to your phone during flashing process.

1. Check Devices
2. Remove Pattern
3. Remove MI Account
4. Enter EDL Mode
5. Unlock Bootloader
6. Unlock Yureka BL
7. Samsung Download Mode
8. Open Command Promot.
9. Remove SPD FRP
10. REmove Qualcomm FRP.
11. Remove Xiaomi FRP
12. Remove Lenovo FRP
13. Remove Moto FRP
14. Remove Yuforia FRP
15. Remove HTC FRP.
16. Micromax FRP ADB Mode.

File Name:-Android Fastboot Reset Tool V2.0

File Size: 884 KB

OPPO FRP UNLOCK CODE

Frp by *#813# 



DIAL  CODE IN CALLPAD 

Online Mobile Repairing Training (Free + Paid ) MOBILE SOFTWARE TRAINING

Online Mobile Repairing Training (Free + Paid )

MOBILE SOFTWARE TRAINING

Call 8793668014 8793678941

Mobile Flashing box such as miracle, dragon, UFS, etc is used for flashing, unlocking, IMEI repair and other mobile related functions. We are pleased to announce apart from selling these mobile flash box, its online training will also be provided. Training will include mobile flash and unlocking through

Flash box. In a batch, a maximum of three students will be there and the training will be provided using WebEx, Skype and Team viewer software. We also assist Hardware training in India and All-around World. Much emphasis is on Practical Training rather than Theoretical.

1- HOW LONG THE COURSES WILL BE?

Each box training period will be different, for max, it will be extended up to 1 week and a daily 1-2 hrs class will be taken.

2- HOW THE CLASSES WILL BE TAKEN?

Our training classes are located in Nagpur India. Students can either go to the nearest training center or can also join the class online.

3- WHAT ARE THE REQUIREMENTS FOR ONLINE CLASS?

A computer and high-speed internet connection. One must have the following software installed on their system WebEx, Skype, and Teamviewer.

4- WHAT ARE THE CHARGES?

Charges vary from course to course and also depend on the knowledge level of the students. If anyone wants the solution for a particular mobile and box then he will be charged for one session. Min. charge for one session is Rs 300.

5- IS TRAINING LIMITED TO INDIA?

No, we are providing training worldwide. Visitors who are interested in training can contact us through our online chat support. We will also provide assistance in installation and other queries. The cost will differ depending upon the Countries. The payment mode will be through PAYPAL OR PHONEPE OR GOOGLE PAY OR PAYTM.

6- WHAT ARE THE BASIC REQUIREMENT FOR ONLINE TRAINING?

An internet connection along with Skype account with an audible headphone to have two-way communication. Team viewer account If there is a requirement to take control of your screen.

How to FRP SM-J120G J210F J260GDDU4 J260GDDU3ASH2 SM-J260G

How to Remove FRP :

Make sure your device is at least 30 percent charged to perform flashing.

• Switch off the mobile

• Press volume down, Power & Menu cable to shift in download mode

• Now open the Odin flash tool

• Select Samsung SM-J120G FRP File.

• Select the Odin tool and open it

• Click AP or PDA then select AP File

• After selection mobile will get detected automatically

• Now click start on system & installation is in process

• After installation mobile switch ON of its own.

How to Flash Sony Xperia Firmware - सोनी एक्सपेरिया फर्मवेयर कैसे फ़्लैश करे

These are the instructions to flash Sony Xperia Firmware (ROM) on any Sony Xperia Smartphone and Tablet using the Sony Mobile Flasher Tool.

ये सोनी मोबाइल टूल का उपयोग करके किसी भी सोनी एक्सपीरिया स्मार्टफोन और टैबलेट पर सोनी एक्सपीरिया फर्मवेयर (रॉम) को फ्लैश करने के इंस्ट्रक्शन हैं।

Requirements: Your device should have at least 30-40 percent of the phone battery to perform the flashing process.

आवश्यकताएँ: फ्लशिंग प्रक्रिया को करने के लिए आपके डिवाइस में कम से कम 30-40 प्रतिशत फोन की बैटरी होनी चाहिए।

Step 1: Download and install Sony Xperia USB Driver on the computer. If

you have already installed the USB driver on the computer then, SKIP this

step.

स्टेप 1: कंप्यूटर पर सोनी एक्सपीरिया यूएसबी ड्राइवर डाउनलोड और इंस्टॉल करें। अगर आपने पहले ही USB ड्राइवर को कंप्यूटर पर इनस्टॉल कर लिया है, फिर इसे SKIP करें 

Step 2: Download and extract Sony Xperia Firmware (ROM) on the  computer. After extracting the firmware, you will be able to see the

following files:

स्टेप2: सोनी एक्सपीरिया फर्मवेयर (ROM) को डाउनलोड करें और एक्सट्रेक्ट करे । फर्मवेयर निकालने के बाद, आप फाइलें देख पाएंगे

Step 3: Download and install Sony Mobile Flasher on the computer. If you have already Installed the Sony Mobile Flasher, then SKIP the step.

स्टेप3: कंप्यूटर पर सोनी मोबाइल फ्लैशर डाउनलोड और इंस्टॉल करें।अगर आपने पहले से ही Sony मोबाइल Flasher इनस्टॉल किया है, तो इसे SKIP करे ।

Step 4: Once Sony Mobile Flasher is installed, Open It (C:drive >  FlashTool).

स्टेप4: सोनी मोबाइल फ्लैशर स्थापित होने के बाद, इसे खोलें (C:drive > FlashTool).

Step 5: Once Sony Mobile Flasher is launched, you will be able to see  following screen:

स्टेप5: सोनी मोबाइल फ्लैशर लॉन्च होने के बाद, आप ऐसी स्क्रीन देख पाएंगे:

Step 6: Now, Click on Flash Button.

स्टेप6:  अभी क्लिक ओं फ़्लैश बटन पे क्लिक करे

Step 7: Now, you will able to see the Bootmode Chooser dialog box.  Select Flashmode and Click on OK button.

स्टेप7: अब, आप बूटमोड सेलेक्ट का बॉक्स देख पाएंगे। Flashmode को सेलेक्ट करें और OK बटन पर क्लिक करें।

Step 8: Now, Click on the Load button and locate the Xperia Firmware (ftf file).

स्टेप8: अब, लोड बटन पर क्लिक करें और एक्सपीरिया फर्मवेयर का पता लगाएं (ftf फ़ाइल)।

Step 9: Select the loaded firmware.

स्टेप9: लोड किए गए फर्मवेयर का सेलेक्ट करें।

Step 10: Click on Flash Button to begin the Flashing process.

स्टेप10: फ्लैशिंग प्रक्रिया शुरू करने के लिए फ्लैश बटन पर क्लिक करें।

Step 11: Turn OFF your Sony Xperia Device.

स्टेप11: अपने सोनी एक्सपीरिया डिवाइस को बंद करें।

Step 12: Press and Hold Volume Down button and Connect the device to the computer using the USB cable.

स्टेप12: वॉल्यूम डाउन बटन दबाएं और USB केबल से डिवाइस कनेक्ट करें

Step 13: Once your device is successfully connected to the computer, you will be able to see Added message in Sony Mobile Flasher tool.

स्टेप13: एक बार जब आपका डिवाइस कंप्यूटर से सफलतापूर्वक जुड़ा होता है, तो आप सोनी मोबाइल फ्लैशर कनेक्ट हो गया ये मेसेज दिख जाएगा।

Step 14: Now, Flashing will begin automatically and may take 5-10 minutes to complete.

स्टेप14: अब, फ्लैशिंग ऑटोमेटिकली शुरू हो जाएगी और 5-10 मिनट ले सकती है ।

Step 15: Once Flashing process is completed, disconnect the device from the computer and Turn it ON.

स्टेप15: एक बार फ्लैशिंग प्रक्रिया पूरी हो जाने के बाद, डिवाइस को डिस्कनेक्ट कर दें और इसे मोबाइल को चालू करें।